Chain Adjuster Marks...

[greenmonster]

Motion Pro CHAIN ALIGNMENT TOOL For $15-$20

Have kept the chain and sprockets on my bike for 27,000+ miles.

How's it work as far as where it attaches and then determining the alignment. For 15-20 bucks it should be good enough.

[brendanp]

The real good alignment tools measure from center of swingarm pivot point to center of axel on both sides.

[nt650hawk]

How's it work as far as where it attaches and then determining the alignment. For 15-20 bucks it should be good enough.

Clamps on top of the sprocket and you sight down the rod to the counter sprocket. Basically sprocket center to sprocket center. I've put a longer rod so it sits just above the counter sprocket for better accuracy.

[Kurlon]

I just spin the wheel and let the chain show me if I'm lined up sprocket wise... the chain will sit to the left or the right on the back of the sprocket depending on which way you're off. If it's centered, the sprocket is riding the chain evenly, aka you're lined up.

[Jim]

The real good alignment tools measure from center of swingarm pivot point to center of axel on both sides.

like the one I put up on this thread.

[Kurlon]

The real good alignment tools measure from center of swingarm pivot point to center of axel on both sides.

You insensitive clod, some of us don't have the luxury of hollow axles or swingarm pivots...

[nt650hawk]

I could never find a tool that works with a SSSA. Discuss.

Sorry form my attempt at trying to funny

[greenmonster]

You insensitive clod, some of us don't have the luxury of hollow axles or swingarm pivots...

[greenmonster]

Clamps on top of the sprocket and you sight down the rod to the counter sprocket. Basically sprocket center to sprocket center. I've put a longer rod so it sits just above the counter sprocket for better accuracy.

sounds simple enuff...especially since I'm simple minded.

[Kurlon]

I could never find a tool that works with a SSSA.

http://www.castlewholesalers.com/TRU...ry-handle.html

[nt650hawk]

sounds simple enuff...especially since I'm simple minded.

That is why I got it.

[Jim]

http://www.castlewholesalers.com/TRU...ry-handle.html

i thought your alignment tool was to have Dan K crash into you, then replace the bike

[greenmonster]

That is why I got it.

My brotha!! Now we can start a club!! "The Simple Minded Society of the Simple Minded NESRians" I can see it in lights! If everyone here 'fessed up, we'd have to turn people away at the door!!

[Kurlon]

i thought your alignment tool was to have Dan K crash into you, then replace the bike

I can't count on him for anything, I told him the bang the swingam to the right, he comes up on my left and nails my shoulder?! Sheesh.

[nt650hawk]

My brotha!! Now we can start a club!! "The Simple Minded Society of the Simple Minded NESRians" I can see it in lights! If everyone here 'fessed up, we'd have to turn people away at the door!!

http://www.nestreetriders.com/forum/...-part-5-a.html.

See you there next time!

[greenmonster]

http://www.nestreetriders.com/forum/...-part-5-a.html.

See you there next time!

You're right...plenty of recruits right there!

[Pittenger5]

I might be there

[greenmonster]

I might be there

...and so it begins...