0
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/up_dis.png)
So I am in the process of finishing a build on an 03 CRF450 and need triples that have an offset of 8-10mm. All I can find online from any of the manufacturers is a 20-22mm offset. My friend has tri-stars that are 10mm on his CRF but they don't even have a web page. And just to clarify, I am talking about the stem to fork offset, not the bar to triple.
Thanks.
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
Tri star has gone the way of the do-do. If you come across any for a smr. Be sure to notify me immediately.
Cliff's Cycles KTM
NETRA enduro B-vet
Close your eyes, look deep in your soul, step outside yourself and let your mind go.
Wirelessly posted (BB Tour: BlackBerry9630/5.0.0.732 Profile/MIDP-2.1 Configuration/CLDC-1.1 VendorID/105)
Try calling Peter Kates or Mike Martire and see if they have any hanging around their shops. Otherwise I would check supermotojunkie to see if anyone is selling them.
-Brian
15 S-Works Venge
is that the guy that bought my crf? It had 10mm tristar clamps. But ya they are done...I don't really know of any companies making them outside of custom work for that offset.
*maybe these guys, but they are in Germany and are probably a billion dollars http://www.xtrig.com/
Last edited by seth399; 08-25-10 at 08:06 AM.
LRRS #399
MX #505
Wirelessly posted (BB Tour: BlackBerry9630/5.0.0.732 Profile/MIDP-2.1 Configuration/CLDC-1.1 VendorID/105)
Where did Matt Barber get his clamps? Didn't he have Red Baron or something like that?
-Brian
15 S-Works Venge
Zip Tie Alley Racing #444
Signature edit by Tricky mike
i'm gonna have to pass on that. i don't know if i'll ever buy a non-platable db again....
Cliff's Cycles KTM
NETRA enduro B-vet
Close your eyes, look deep in your soul, step outside yourself and let your mind go.
RG3..................but not for Hundo's
http://www.rg3suspension.com
or
http://www.motosport.com/dirtbike/pr...talogId=105866
Last edited by Pigman; 08-25-10 at 09:42 AM.
LRRS EX 66
BostonMoto | Yoshimura | GoPro | K/N | Amsoil | Computrack | Vortex Sprockets |
EBC | Dunlop | Woodcraft | ArmourBodies | Fuel Clothing | Progrip | FmF Racing|
factoryeffex
red baron has 14/16...cheaper than oem's for the 125. i'll be keeping an eye on the smj classifieds too.
Cliff's Cycles KTM
NETRA enduro B-vet
Close your eyes, look deep in your soul, step outside yourself and let your mind go.
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
yup I had 07
LRRS #399
MX #505
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
Wirelessly posted (BB Tour: BlackBerry9630/5.0.0.732 Profile/MIDP-2.1 Configuration/CLDC-1.1 VendorID/105)
XTRIG clamps are adjustable offset, but I couldn't figure out what you the offsets were. Personally I would look pretty hard at those Red Baron clamps. I had the 8mm TriStars on my KTM, but I ran into the 23s on the stock (18mm) clamps. Gosselin ran stock clamps on his KTM down into the teens.
And smutty, the 07 you rode wasn't Seths old bike. Same triple clamps, but different bike.
Last edited by lrrs313; 08-25-10 at 01:57 PM.
-Brian
15 S-Works Venge
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
Are you talking about Adam? if so then he didn't buy it. I sold it this past winter to a guy who lives near Loudon but said he probably wouldn't race, just track days. Mine was all white
LRRS #399
MX #505
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
ah cool, ya I remember his being built pretty sweet
LRRS #399
MX #505
Take a look at Shanes motard someday. Dirtbike with slicks he uses the same bike for flat track MotoX and Supermoto. no special valving or clamps just 17s with slicks.
Zip Tie Alley Racing #444
Signature edit by Tricky mike