0
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/up_dis.png)
Does anyone know if there is a way to weld plastics that aren't horribly cracked.
I heard someone talking about welding plastics once, but I didn;t know how that could be possible restoring the structural integrity of a cracked plastic...
ANy thoughts /Wisdom?
i'd send the parts you need repaired to the guy's at empiregp.com
jim
"Molon labe"
PLASTIC EPOXY + FIBERGLAS THE INSIDE!
TIM! STOP BEING A PUSSY & JUST RIDE IT!!! THERE'S NOTHING WRONG W/ YOUR BIKE. YOU!!!
![]()
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
Soldering iron, pistol style. Works great. Regards, Snake
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
I'm still tryin to chill out. I was just wondering in case some shit happens in the future and I don't have the bread$$ for new plastics, and I was just curious to know if you could actually weld plastic with out it being half assed//////////P.S. I maybe a PUssy But I'm not a Bitch,,hehheheh (on my own bike) OOOOOOOOOOOhhhhh. Besides if I had to choose between being a pussy and a Dick I'll take the Pussy anyday...![]()
Originally posted by FireFly
I'm still tryin to chill out. I was just wondering in case some shit happens in the future and I don't have the bread$$ for new plastics, and I was just curious to know if you could actually weld plastic with out it being half assed//////////P.S. I maybe a PUssy But I'm not a Bitch,,hehheheh (on my own bike) OOOOOOOOOOOhhhhh. Besides if I had to choose between being a pussy and a Dick I'll take the Pussy anyday...![]()
You definately sound like a PUSSY!![]()
And Pete sounds like a DICK!![]()
YOU TWO make a perfect couple!!!![]()
![]()
![]()
![]()
![]()
The only people that drank for free the other night were my Bitches.... so how much did you pay for that cup, Chad?![]()
-Pete LRRS/CCS #81 - ECK Racing, TonysTrackDays
GMD Computrack Boston | Pine Motorparts/PBE Specialists | Phoenix Graphics | Woodcraft | MTag-Pirelli | OnTrack Media
The Garage: '03 Tuono | '06 SV650
I TAKE what I Want--------------Biatch!!!!Originally posted by OreoGaborio
The only people that drank for free the other night were my Bitches.... so how much did you pay for that cup, Chad?![]()
![]()
S.O.B. I paid for a cup and got like a beer and a half, But its all good because it clears me of being pete's bitch....Speaking of which,,I gotta give props bro, the girl to guy ratio at the party was pretty good.. If I had made more of an attempt to nab one of those under-aged ProstiTOTs , I might have gotten the hammer polished.![]()
The high light of the night....One Word, CHAPS hahahahahhahahahah
SEXY Though!!!------huh biatch--ya admit itOriginally posted by FireFly
The high light of the night....One Word, CHAPS hahahahahhahahahah![]()
![]()
Chad, when you wrote, "plastic epoxy + fiberglass on the inside" Are you talking about the stuff you fix fiber glass car hoods and surf boards? The mesh that comes with a resin you slopp on it and sand down once it cures??Thanks
YES------but you buy the fiberglas repair kit sold at a marine store (west marine) and it is easier to work with(no slopping it on) and comes out much easier!Originally posted by FireFly
Chad, when you wrote, "plastic epoxy + fiberglass on the inside" Are you talking about the stuff you fix fiber glass car hoods and surf boards? The mesh that comes with a resin you slopp on it and sand down once it cures??Thanks
plastic epoxy is like glue for plastic