2004/2005 GSXR 600/750 Caliper bolt

[wiggeywackyo]

As it says, I need a caliper bolt for this weekend and Parkway Cycle won't have any for 3-5 days.

Anyone?

[Pigman]

As it says, I need a caliper bolt for this weekend and Parkway Cycle won't have any for 3-5 days.

Anyone?

I have a set off an 06 600 but they may be a bit differnt in length..but you can try if you want

[wiggeywackyo]

Sweet, I guess that wouldn't hurt. What day are you going up pigman?

[BluGixxer]

If you get in a bind, you don't have to use OEM bolts. I have an 05' 750 and from the fist time I hade someone change my front tire, they stripped out the allen boltt, so I left them in , and now they are stuck, I m going to cut them off, and I'm not going to pay $15.00 per bolt from the stdealer. A good hardware storee will have them

[wiggeywackyo]

Well, they aren't expensive but I figured if I'm going to drill it, I might as well do it with the right ones. They're only $3-4 a piece, just slow on shipping.

[Pigman]

I wil be up friday afternoon and either at my camper in turn 3 Posse or garage 9 north...I have them in my trailer

[Jim]

i should have some with me as well. garage 9 next to piggy

[wiggeywackyo]

Jim, are yours for an 06?

[Jim]

yup, we both have 06's at the track.
i do have 04/05 calipers at home, but no bolts for them.

[Pigman]

Jim, are yours for an 06?

yes....but Frenchy I think will be up and may have some for an 05 or PM him....

[wiggeywackyo]

Well, I'll come check 'em out anyways. Haven't seen you since we did that deal in the parking lot. haha.

Who's Frenchy?

[Pigman]

Well, I'll come check 'em out anyways. Haven't seen you since we did that deal in the parking lot. haha.

Who's Frenchy?

He is on here and out of RI.....ill call and ask gimme a sec



I left a MSG....but will ask and get back to you....and yea come by and Say HI.......U racing too Right

[jamotech741]

yup, we both have 06's at the track.
i do have 04/05 calipers at home, but no bolts for them.

I still have the caliper bolts from the calipers I sold Jimmy, drilled for safety wire I believe. Ill be there Friday.

[wiggeywackyo]

Where in Malden are you?

[wiggeywackyo]

He is on here and out of RI.....ill call and ask gimme a sec



I left a MSG....but will ask and get back to you....and yea come by and Say HI.......U racing too Right

Thanks man. Yup, I'm racing this weekend. I hope my license thing is all figured out....

[jamotech741]

Where in Malden are you?

Not in Malden anymore, NH now.