0
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/down_dis.png)
![Not allowed!](https://www.nestreetriders.com/forum/images/buttons/up_dis.png)
So I picked up a full titanium K-factory header and midpipe for my zrx1100. The bike has a 12.5:1 1109 kit, ZX11 cams, head work, etc and the Kerker full system seemed a little restrictive. And loud as fuck.
This K-Factory system is larger dia. down tubes and has a 60mm midpipe. With the SS can that's on it now, still loud as fuck.
I'm looking for an oval or tri-oval can in titanium or carbon fiber that will work with it. I may just go with a titanium Ladybird can but was hoping for something a little quieter.
This system(with the stainless can on it now) weighs so much less than the Kerker that you can feel a difference in handling. Even on this old pig...... The header and midpipe together weigh 6.5lbs with the mounting flanges and aluminum mounts. If I go with a Ladybird ti can it's 680 grams. Just silly.
Thanks!
![]()
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
So that's what you've been up to! Beautiful bike.
99 + 02 SV650 ex-race - 91 FJ1200 street - 03 KDX220R woods - 12 WR450F motard/ice
Fuck. I miss my zrx.
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
Thanks Doug! I found a Two Bro's can in the garage that I will adapt if I can't come up with the slip on.
It's good to have three ZRX's in the garage!![]()
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
Is the 3rd one a 1200?
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
Third one is my girlfriends 2003 blue.
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
Now you just need the silver one!
-Christian LRRS/CCS HasBeen ECK Racing
2011 Pit Bike Race CHAMPION!
I'd do silver bump.
Arata and TiForce can's are 60mm i think....
.
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
I have a Akropovic can from a full system off of my Tuono that may fit the bill. Its got a little rash on the outside but it was on the left hand side of the bike so......
Let me know if interested and I'll get a photo and a measurement.
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
The can is 60mm. Also it's a left hand side as i stated before.
Make me a reasonable offer.
pics attached.
Got it. Thanks!
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
I believe they are both titanium but unsure exactly. They are left side link pipes each slightly different. Both are off of a Akrpopovic full system for 2007-2010 rsvr or tuono. They list for about $300.00 each from AF1 and that's where I got them brand new. They are still brand new never having any gases flowing thru them. I'll ship them both to you for the same amount as the silencer.
Last edited by Rosco61; 02-01-15 at 01:51 PM.
Picture?
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
Sorry for the delay just got busy.
Thanks. I'll have a look tomorrow and let you know.
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
Unfortunately, I don't think I can use them with this project. Thanks anyway.
I'm going to get the Akro modified and the scuff mark repaired next weekend. I think this pipe will be exactly what I was looking for as the outlet is standard sized and that will keep the db level down a little. Also, I know mostly how it'll sound as I have a full Akro on my other ZRX and it sounds great!
If anyone else has a 60mm slip on I'd still be interested in buying it. Especially a carbon fiber one.
![]()
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100
TTT
Jake
2006 ZX-10R
1999 Kawasaki ZRX1100