Wtb front master

[Chippertheripper]

I need a master for the motard. I imagine anything from a modern sportbike should work as long as the banjos are the same diameter. It only needs to push one four pot binder. On the cheap please.

[b0xmonkey]

I got a few 1st gen sv masters. Not the latest in technology but if you want one you can have it.

[Pigman]

If you want to try my old gsxr one its all you...

[OreoGaborio]

So do you have one for free? Do you have one for sale? Or do you want to buy? Cuz ya got it in the wrong forum w/ the wrong prefix, foo!

[Chippertheripper]

Want to buy/get/youknowwhatthefuckimtalkingabout

[OreoGaborio]

Wirelessly posted (iPhone 4s)

[k_cotter]

I had a feeling id be seeing this post after your little 'hey buddy' with the corner workers on Monday

[Chippertheripper]

I had a feeling id be seeing this post after your little 'hey buddy' with the corner workers on Monday

Who are you?
Coming into 3 wfo and the lever goes to the bar...ahh yup. Good to stop at the split and not the tires.
It bled (again) and was fine for a few sessions and then happened again going into the bowl. And then I called it a day.

[maxim_X]

If you don't find one by when you need it you can borrow the one off my GSXR. It's not going anywhere fast.

[OreoGaborio]

Who are you?
Coming into 3 wfo and the lever goes to the bar...ahh yup. Good to stop at the split and not the tires.
It bled (again) and was fine for a few sessions and then happened again going into the bowl. And then I called it a day.

If you pump the lever do they come right back as if the pistons are getting pushed back into the calipers?

[Chippertheripper]

You're going to have to rephrase that in the form of a question.

Yeah, they eventually work, but spongy as fark. Not good enough to ride.

[OreoGaborio]

Answers my question... was pondering the possibility of something else being wrong with the front end, be it a spacer, wheel bearing, rotor or rotor carrier, etc. Something like that could push the pistons back into the caliper which would require pumping the lever to mash the pads back into place. I've even had that happen after a big headshake moment.