NESR dyno day @ my shop???

[svridah03]

[JJ]

This is mine from my 87GT done at the Dyno shop in Concord.

[Piper33U]

I'd be down for this, I want to see if my bike is really pulling what the guy i bought it from said its pulling.

[Daytona440]

I'd be interested in getting my Mustang Dynoed before i starte modding it...

[SWEET_Z]

So where exactly is South Canuckistan?

I may make a trip with my 95 Z28 vert. It's basically stock except for a cold air kit.

Planning on upgrading the shitty LT1 calipers to the LS1 style. Can I do a reverse dyno and see how much braking power I gain?

[svridah03]

Southern canuckistan is Hooksett NH
:-)

[Graffix31]

so about how long does it take to remap a pc3 on the dyno? can you possibly do 2 bikes in an hour?. are you waitin till the weather turns to set a date??

[svridah03]

i can do one bike per hour
usually

im awaitng the delivery of the dyno to set a date (apr 1 i think)

[Graffix31]

is this still going to happen next month??

[svridah03]

yep

the dyno is almost finished!! under 14 days till delivery

YAY!!

onec its in the shop ill let you all know

[Graffix31]

awesome cant wait. 2 weeks should be perfect, hopefully the weather will really break by then.

[svridah03]

DATE SET
April 24TH

unless somene has a better Idea

People coming :

Graffix31 (2 bikes)
Joberly

[Nikon]

I will probably be gettin a hold of you early in the summer once I get my jet kit in but end of this month is a no go for me. Good luck.

[joberly]

As long as the weather holds I am definatly in.....

[OreoGaborio]

i say you dyno my bike for free so you can calibrate it

i MAY be down for this, i'll let cha know

[svridah03]

Originally posted by OreoGaborio
i say you dyno my bike for free so you can calibrate it

i MAY be down for this, i'll let cha know

i prefer not to put muddy low hp broke bikes on my new dyno

i mean shit u may fall off it while strappin git down !!!




O_o

(cheap shot!)

[OreoGaborio]

[Piper33U]

Whats the cost for this Dyno day?

[Honclfibr]

Originally posted by svridah03
i prefer not to put muddy low hp broke bikes on my new dyno

i mean shit u may fall off it while strappin git down !!!




O_o

(cheap shot!)

Looks like the season's been extended!

[svridah03]

Originally posted by Piper33U
Whats the cost for this Dyno day?

depends how long we tune
1 hour with tuning should be about $125

[R7]

Originally posted by svridah03
DATE SET
April 24TH

unless somene has a better Idea

People coming :

Graffix31 (2 bikes)
Joberly

That's a race weekend

[highsider]

Can you dyno my truck? According to the chip tuner, I should be around 600 ft./lbs. and 400hp.

I'd bring the R1 too.......

[svridah03]

Originally posted by highsider
Can you dyno my truck? According to the chip tuner, I should be around 600 ft./lbs. and 400hp.

I'd bring the R1 too.......

we can do both
4wd truck ?

[Honclfibr]

I might swing in to say hello seeing as you're so close. No dynoing for me though, my bike's too fast for me already

Might have to give you a call once I'm finished with the e-cripz turbo swap tho, seeing as you've got one of them all wheel thingamajobs.

Speaking of which, you should post up over at www.newengdsm.org, I'm sure you could find a few folks over there to patronize your new dyno.

[Mad Max]

How about if I just want to get the bike on there and get a few readings at half throttle, full throttle etc.?

I have a carbed bike and it takes about an hour just to change the main jets or pilot jets. I would just want a couple runs to see what the A/F ratio is and make corrections on my own time.

So this is a load dyno, correct? Not just a big hunk of round stock hooked up to a computer?